Laminate floors are durable and easy to maintain, but they can also get stained by wax from candles, crayons, or furniture polish. Wax can make your laminate floor look dull and dirty, and it can also make them slippery and unsafe. Fortunately, there are some simple ways to remove wax from laminate floors without damaging them. Here are some tips and methods that you can try at home.
What You Will Need
- A plastic scraper or a credit card
- A clean cloth or paper towel
- Rubbing alcohol or mineral spirits
- A bucket of hot water
- Detergent (such as dish soap)
- An ammonia-based cleaner (like window cleaner)
- A sponge or brush
- A mop or another cloth
Step 1: Scrape Off Excess Wax
The first step is to scrape off any excess wax that is on the surface of your laminate floor. You can use a plastic scraper or a credit card for this purpose. Be careful not to scratch the floor with the edge of the scraper or card. Gently lift the wax off the floor and discard it.
Step 2: Apply Rubbing Alcohol or Mineral Spirits
The next step is to apply a small amount of rubbing alcohol or mineral spirits onto a clean cloth or paper towel. Rubbing alcohol and mineral spirits are solvents that can dissolve wax and make it easier to remove. Rub the affected area with a cloth or paper towel until the wax is removed. You may need to repeat this step several times until all the wax is gone.
Step 3: Clean with Hot Water and Detergent
The third step is to clean the area with hot water and detergent. This will help remove any residue or dirt that may be left behind by the wax or the solvent. Mix a cup of detergent in a gallon of hot water and stir well. Dip a mop or another cloth in the solution and wring it out. Wipe the floor with the mop or cloth in one direction. Try to wipe off any remaining wax as you do so.
Step 4: Rinse with Ammonia-Based Cleaner
The final step is to rinse the area with an ammonia-based cleaner. This will help restore the shine and remove any odors that may be caused by the wax or the solvent. Ammonia-based cleaner on the area and wipe it up with a sponge or brush. Let the floor dry completely before walking on it.
Removing wax from laminate floors is not a difficult task if you follow these steps. However, you should always test a small inconspicuous area of your floor before applying any product to make sure it does not damage your floor. You should also avoid using abrasive tools or products that may scratch your laminate floor. By following these tips, you can keep your laminate floors clean and shiny for a long time.
Hardwood Flooring in Brampton & Mississauga
Laminate Flooring Sale Kitchener,
Leave a Reply